|
|
|
|
|
|
|
EXTENDER PORTU SDI Z ZASIĘGIEM 20km NA JEDNYM KABLU
ŚWIATŁOWODOWYM
|
 |
FUNKCJONALNOŚĆ
The XTENDEX® SD/HD/3G-SDI Extender via Fiber Optic Cable locates up to
two displays from a SD/HD/3G-SDI video source up to 12.4 miles (20
kilometers) away using a single singlemode LC fiber optic strand and
1,640 feet (500 meters) using multimode fiber optic cable. Each
extender consists of a transmitter that connects to a SD/HD/3G-SDI
video source and a local loop out, and a receiver that connects to up
to two SD/HD/3G-SDI displays.
- Signal transmission via one singlemode or multimode LC fiber optic cable.
- Using singlemode 9-micron cable, extend to 12.4 miles (20 kilometers).
- Using multimode 50-micron cable, extend to 1,640 feet (500 meters).
- Supports HDTV resolutions to 1080p @60Hz.
- Simultaneously transmits to two SD/HD/3G-SDI displays at the receiver.
- Supports a local display via loop out SDI connector.
- Supports unidirectional RS485 from the receiver to the transmitter.
- Plug-and-play functionality – no
software needed.
- Low RFI/EMI for sensitive
applications.
- Cables can be installed in
conduit prior to extender installation.
- Integrated mounting brackets for
easy surface/wall mounting.
|
 |
SPECYFIKACJA TECHNICZNA
Moduł lokalny
-
One female 75 ohm BNC connector for SD/HD/3G-SDI video input.
- One female 75 ohm BNC connector
for local SD/HD/3G-SDI loop out video output.
- One female LC fiber connector.
- One 2-pin terminal block for
RS485 (reserved for future use).
Moduł wyniesiony
-
Two female 75 ohm BNC connector for SD/HD/3G-SDI video output.
- One female LC fiber connector.
- One 2-pin terminal block for
RS485 (reserved for future use).
Video
-
Supports HDTV resolutions to 1080p @60Hz.
- Protocols supported: SMPTE 292M,
SMPTE 424M, SMPTE 425M
- Supports NTSC and PAL video.
RS485
- Supports unidirectional RS485 from the receiver to the transmitter.
- Baud rate: 1200, 9600, 115200
Zasilanie
- Local and remote unit:
- Input: 230 VAC at 50 or
60Hz via AC adapter (included).
- Output: 5VDC, 1A
- Power consumption: 2.5W
Wymiary
SxWxG
- Local and remote unit WxDxH:
4.81x4.11x1.13 in (122x104x29 mm)
Wymagania
środowiskowe
- Temperatura
pracy: -20°C do 55°C
- Wilgotność
względna pracy i przechowywania: 0 do 95% bez efektu
kondensacji
Certyfikaty
Gwarancja
Maksymalny
zasięg
-
12.4 miles (20 km) over singlemode 9/125-micron LC simplex fiber optic
cable.
- 1,640 feet (500 meters) over
multimode 50/125-micron (OM2/OM3/OM4) LC simplex fiber optic cable.
Kable
-
Interface cables between the video source/display and the
transmitter/receiver are required for proper operation
- Use a simplex LC singlemode
9/125-micron fiber optic cable to extend the receiver from the
transmitter up to 12.4 miles (20 kilometers).
- Use a simplex LC multimode
50/125-micron (OM2/OM3/OM4) fiber optic cable to extend the receiver
from the transmitter up to 1640 feet (500 meters).
- Cables not included.
|
|
Zestawienie
oferowanych urządzeń
|
|
Nazwa
|
Nr katalogowy
|
Karta katalogowa
|
|
3GSDI Extender via One
Singlemode or Multimode LC Fiber Optic Cable
|
ST-1FO3GSDI-LC
|
Karta
katalogowa
|
|
|
|
|
|
