|
|
|
|
|
|
|
CZTEROKANAŁOWY WYŚWIETLACZ VIDEO HDMI Z FUNKCJĄ KVM
- 2K
|
 |
FUNKCJONALNOŚĆ
The SPLITMUX® HDMI Quad Screen
Multiviewer with Built-in USB KVM Switch allows you to simultaneously
display video from four different computers on a single monitor.
Additionally, it can switch one of the four attached computers to a
shared keyboard and mouse for operation and to two additional USB
devices. It is capable of displaying the video sources in quad, PiP,
full, or custom mode. In custom display mode, each of the quadrants can
be adjusted to any size and positioned to any location on the display.
-
Quad, Picture in Picture, Full Screen, and Custom display
modes.
- Custom Display Mode: the size,
position and selection of any or all windows are customizable.
- 2- and 3-source viewing is
possible with this method.
- Maintain input aspect ratio if
desired—no stretching necessary.
- Layer display windows and adjust
transparency of each video source display.
- Switch one of the four attached
computers to a shared USB keyboard and mouse for operation.
- Supports 2K resolution 2048x1080,
HDTV resolutions to 1080p, and computer resolutions to 1920x1200
(WUXGA).
- Independent video in to video out
resolution.
- HDMI features supported:
- Inputs: 24-, 30-, and 36-bit
xvYCC, sRGB, and YCbCr.
- Outputs: 24- and 30-bit
sRGB.
- Four-channel non-mixing or one
channel mixing stereo with 16-, 20-, or 24-bit uncompressed PCM
audio.
- HDCP compliant.
- Fluid, real-time video
performance with 60 frames per second (fps) in all four
quadrants.
- Zoom, pan, and crop the image
from any source to focus on key areas.
- Switch audio independently of
video from connected HDMI sources.
- Multiple audio sources can be
simultaneously active in any display mode or preset layout.
- Adjustable audio gain with VU
level indicators for each input channel.
- A customized text label can be
added for each video window to provide easy input identification
(UMD).
- Control the multiviewer through
Ethernet, RS232 serial port, on screen display (OSD), front panel
buttons, or IR remote.
- Built-in 2-port USB hub - switch
devices between connected computers.
- In Full Screen mode, USB touch
screen monitors can be used to control the connected active
computer.
- Compliant with USB 2.0
(high-speed and low/full speed) standards.
- Cascade multiviewers to display
video from any number of video sources on one screen.
- Each video source in the cascade
can be controlled directly from the Web Server graphical user interface
under Custom Mode Settings.
- Backup and restore multiviewer
configurations.
- Supported output resolutions can
be selected or set to auto detect optimal resolution from the monitor's
EDID.
- Available options: desktop unit,
1RU rackmount unit, dual side-by-side rackmount units in 1RU
- Rackmount units can be mounted so
that the front panel buttons are facing the front or back of the
rack.
- Rackmount units include cable
management shelf.
|
 |
SPECYFIKACJA
TECHNICZNA
Hosts
-
Four female HDMI connectors.
- Four female USB Type B
connectors.
- Supports USB computers.
- Boots PCs, SUNs, and MACs
simultaneously.
- Supported video input
resolutions:
- 2K Cinema (2048x1080 @
60Hz)
- HDTV resolutions to
1080p
- Supports digital HDMI devices,
such as DVD/Blu-ray players, satellite receivers and HDTV
tuners.
- Multiplatform support: Windows
2000/XP/Vista/7/8/10, Windows Server 2000/2003/2008/2012/2016, Solaris,
Linux,
FreeBSD, and MAC OS 9/10.
- A DVI source can be connected by
using the DVI-HD-xx-MM cable (not included). The cable does not pass
audio to the multiviewer.
- Use a video + audio to HDMI video
converter to pass embedded HDMI audio into the multiviewer.
- Supports HDCP 1.2
Monitor
-
One female HDMI connector.
- Supported video output
resolutions:
- 2K Cinema (2048x1080 @
60Hz)
- HDTV resolutions to
1080p
- HDMI-embedded audio switching
(four-channel stereo, non-mixing or one-channel stereo,
mixing).
- Switch audio independently of
video from connected HDMI sources.
- Multiple audio sources can be
simultaneously active in any display mode or preset layout.
- A DVI display can be connected by
using the DVI-HD-xx-MM cable (not included). The cable does not pass
audio to the display.
- Use a video + audio to HDMI video
converter to pass embedded HDMI audio into the multiviewer.
- Latency:
- 50mS at 60Hz
- 60mS at 50Hz
- 100mS at 30Hz
- 120mS at 25Hz
- 125mS at 24Hz
- Supports HDCP 1.2
Devices
-
Two female USB Type A connectors for keyboard and mouse.
- Keyboard and mouse are
hot-pluggable.
- Two female USB Type A connectors
for USB peripheral devices (printers, scanners, security cameras, flash
drives, etc.)
- Connect any type of USB device -
fully transparent USB connectors.
- Switch USB 2.0 devices between
connected computers.
- In Full Screen mode, USB touch
screen monitors can be used to control the connected active
computer.
- Provides support for high-speed
(480 Mbps), full-speed (12 Mbps), or low-speed (1.5 Mbps) USB devices.
Protocols
-
HTTP, HTTPS
- TCP/IP, DHCP, UDP, ARP
- IPV4
- Supports HTTP REST API to
configure SPLITMUX-USBHD-4RT with response in JSON format.
Zasilanie
-
230 VAC at 50 or 60Hz via country-specific AC adapter.
- Power consumption: 20W
MTBF
-
SPLITMUX-USBHD-4RT: 101 457 h
Dimensions
-
SPLITMUX-USBHD-4RT (desktop)
- WxDxH (in): 7.35x4.98x1.75
(187x126x45 mm)
- SPLITMUX-USBHD-4RT-R (1RU
rackmount)
and SPLITMUX-USBHD-4RT-2R (1RU dual side-by-side rackmount)
- Without rackmount kit:
7.35x4.98x1.75 (187x126x45 mm)
- With rackmount kit: 19x4.98x1.75
(483x126x45 mm) (excludes cable tray)
- Can be mounted so that the front
panel buttons are facing the front or back of the rack.
- Includes cable management
tray.
Wymagania
środowiskowe
- Temperatura
pracy: 0°C do 50°C
- Temperatura
przechowywania: -30°C do 60°C
- Wilgotność
względna pracy i przechowywania: 17 do 90% bez efektu kondensacji
Certyfikaty
Gwarancja
Package
Includes
-
Multiviewer
- One power adapter
- One DB9 female to RJ45 female
adapter
- One 5ft CAT5e super flat
cable
- One IR remote control
- Manual
|
 |
 |
Display
Modes
Quad
Mode
-
In quad mode, the screen is split into four fields of equal size each
displaying the entire contents of the corresponding input.
- Fluid, real-time video
performance with 60 frames per second (fps) in all four
quadrants.
- Borders can be set for each image
input.
Full
Screen Mode
-
In full screen mode, one of the four video sources is displayed in full
screen size and maximum resolution.
- Scan feature: cycle through four
different sources at set intervals.
- USB touch screen monitors can be
used to control the connected active computer.
Picture
in Picture (PIP) Mode
-
In PIP mode, the full screen display of one of the four video sources
is accompanied by one, two, or three small images (thumbnails) of the
three other video sources on the right hand margin of the screen
allowing simultaneous monitoring.
- Size, position and selection of
the thumbnails are customizable.
- Scan mode: choose between Off,
PiP Scan, or Active Scan.
- PiP Scan: select "Single",
"Double" or "Triple"
- Single: scans through the
non-active channels in a single thumbnail. The channel set as full
screen does not change.
- Double: scans through the
non-active channels between two thumbnails. The channel set as full
screen does not change.
- Triple: the full screen image and
each of the three thumbnails alternate active channels.
- Active Scan: the full screen
image and each of the three thumbnails alternate active channels.
- Manual Active Scan: Scanning will
be in the order of inputs manually selected for PIP1, PIP2 and PIP3.
- Auto Active Scan: Scanning will
be in consecutive order of HDMI inputs 1 through 4.
- Borders can be set for each image
input.
- Aspect ratio can be maintained
for all outputs.
Custom
Mode
-
In Custom mode, each video source is displayed in its own separate,
detached window.
- Size, position and selection of
the windows are customizable.
- Use web server graphical user
interface to configure settings for each window.
- Zoom, pan, and crop the image
from any source to focus on key areas.
- Presets of the window positioning
can be saved.
- Borders can be set for each image
input.
- Display optional Left/Right VU
level indicators for each corresponding display window.
- Chroma Key Setting provides the
ability to superimpose elements from one video feed onto another video
feed.
- Configure up to 10 preset layouts
that can be switched live at any time.
|
 |
Control
Methods
Front
Panel Interface
-
Use front panel buttons to locally change ports or to select a display
mode.
Ethernet
Control
-
Configuration can be done over the Internet/LAN via Web page or
Telnet.
- Supports Internet Explorer 6.0 or
higher, Firefox 2.0 or higher, Opera 9.0, Google Chrome, Safari 4.0 or
higher for MAC and PC.
- Configure and control the
settings for the system, network, input, output, and modes.
- Female RJ45 connector.
- 10/100 BaseT Ethernet
interface.
- Security is ensured by password
and user configurable timeout.
- Up to 16 users can access the web
page at one time.
- The user with administrative
privileges can access the following pages:
- System page: allows configuration
of unit, serial port, and OSD settings.
- Network pages: configure IP and
server settings.
- Inputs page: allows configuration
of the four video inputs.
- Output page: configure the video
and audio output parameters.
- Modes page: allows selection and
configuration of the output display mode.
- User Config page: add, configure,
and view all users.
- Firmware page: update firmware
for the SPLITMUX.
- Security is ensured by
password.
- Menu commands are similar to
RS232 commands.
- The telnet server listens on port
2000.
- Port 2000 is for an operator
telnet session.
On
Screen Display (OSD)
-
Select display modes and computers with On Screen Display
(OSD).
- Use the front panel buttons or
keyboard commands to operate the OSD.
- OSD controls for configuration
and control of the system, network, input, output, and display
modes.
- Access to OSD Mode can be limited
by an administrator-assigned PIN number
RS232
-
Configuration and control can be done through the serial port.
- Control the multiviewer using the
Text Menu via RS232.
- Selectable baud rate: 1200 to
115,200 bps.
- Baud rate is set via the front
panel interface, serial command, OSD, or web interface.
Infrared
Remote Control
-
Routes video and audio signals together or independently.
- Transmitter can be up to 30 feet
(9.1 meters) away.
- Power: two AAA batteries
(included).
Keyboard/Mouse
-
Use keyboard or mouse commands to select display mode and to select
port.
|
|
Zestawienie
oferowanych urządzeń
|
|
Nazwa
|
Nr katalogowy
|
Instrukcja obsługi
|
Karta katalogowa
|
|
HDMI Quad Screen
Multiviewer with Built-In KVM Switch, Desktop
|
SPLITMUX-USBHD-4RT
|
PDF
manual
|
Karta
katalogowa
|
|
HDMI Quad Screen
Multiviewer with Built-In KVM Switch, 1RU Rackmount
|
SPLITMUX-USBHD-4RT-R
|
|
HDMI Quad Screen
Multiviewer with Built-In KVM Switch, 1RU Dual Side-by-Side Rackmount
|
SPLITMUX-USBHD-4RT-2R
|
|
Kabel z wtykami
"męskimi" HDMI
|
|
Nr katalogowy
|
Długość
|
|
HD-3-MM
|
0,9m (3 feet)
|
|
HD-6-MM
|
1,8m (6 feet)
|
|
HD-10-MM
|
3,0m (10 feet)
|
|
HD-15-MM
|
4,5m (15 feet)
|
|
HD-20-MM
|
6,0m (20 feet)
|
|
HD-30-MM
|
9,0m (30 feet)
|
|
HD-50-MM
|
15,0m (50 feet)
|
|
|
|
|
|
