|
|
|
|
|
|
|
MATRYCOWY PRZEŁĄCZNIK PORTÓW HDMI (16x16 i 32x32) - 4K
|
 |
FUNKCJONALNOŚĆ
The VEEMUX® 4K HDMI Video Matrix Switch routes digital 4Kx2K HDMI video and audio signals from up to 32 HDMI video sources (computers, Blu-Ray players, satellite receivers, etc) to up to 32 displays (monitors, 4K TV's, projectors, etc).
- Configure and control the switch through front panel buttons, Ethernet, RS232, or optional IR remote control.
- Control4 certified.
- Module controls routing, reset, and status RS232 functions.
- Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 and 4096x2160 @24/30/60Hz RGB/YUV 4:4:4).
- Each input can be independently connected to any or all outputs.
- HDCP 2.2 and 1.4 compliant.
- HDMI features supported:
- Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, DTS 7.1 and LPCM audio passthrough
- RGB, YUV 4:4:4, YUV 4:2:2, and YUV 4:2:0
- 12-bit Deep Color
- Bandwidth up to 600 Mhz (18
Gbps)
- EDID learning for the support of
any HDMI display device.
- Selectable built-in EDID table.
- Compact case – 16x16 in 1RU and 32x32 in 2RU.
- Cable management tray included.
|
 |
SPECYFIKACJA
TECHNICZNA
Video Input
- Female HDMI input connectors.
- Compatible with computers and UHD video sources (satellite receivers, Blu-Ray players, etc) with HDMI video.
- Supports HDCP 2.2/1.4
- Multiplatform support: Windows 7/8/10/11, Windows Server 2008/2012/2016/2019/2022, Solaris, Linux, FreeBSD, and MAC OS 10/11/12/13.
Video
Output
- Female HDMI output connectors.
- Supports resolutions up to Ultra-HD 4Kx2K (3840x2160 and 4096x2160 @24/30/60Hz RGB/YUV 4:4:4).
- Supports HDCP 2.2/1.4
- Max data rate: 18Gbps
Protocols
-
HTTP, HTTPS
- TCP/IP, DHCP, UDP, ARP, TLS v1.2
- IPV4
Zasilanie
- Input: 230 VAC at 50 or 60 Hz via AC adapter (AC adapter included.)
- Power consumption:
Wymagania
środowiskowe
- Temperatura
pracy: 0°C do 40°C
- Temperatura
przechowywania: -30°C do 60°C
- Wilgotność względna pracy i przechowywania: 5 do 90% bez efektu kondensacji
Wymiary
- SM-16X16-HD4K WxDxH:
- Without cable management tray: 19x14.56x1.75 in (483x370x44 mm).
- With cable management tray: 19x18.36x1.75 in (483x466x44 mm).
- SM-32X32-HD4K WxDxH:
- Without cable management tray: 19x18.57x3.5 in (483x472x88 mm).
- With cable management tray: 19x22.48x3.5 in (483x571x88 mm).
MTBF
- SM-16X16-HD4K: 25,024 hours.
Kable
- Interface cables between the video sources/displays and the switch are required for proper operation.
- Supports cable lengths to 20 feet for 4Kx2K resolutions at 60Hz and lengths to 50 feet for 1080p at 60Hz using passive HDMI cables.
- Cables longer than 50 feet can be used provided they have a built-in video equalizer (also known as "active HDMI cables").
- Use HD-xx-MM HDMI cables to connect an HDMI source or display.
- HD-3/6/10/15-MM supports resolutions to 4K@60Hz.
- HD-25/30/50-MM supports resolutions to 1080p@60Hz.
- Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet.
- HD-ACT-20/25/30/40/50/60-MM supports resolutions to 4K@60Hz (18 Gbps).
- HD-ACT-75/100-MM supports resolutions to 4K@30Hz (10.2 Gbps).
- Use DP-HD-xx-MM cables to connect a DisplayPort source up to 15 feet away from the switch.
- Supports resolutions up to 4k@30hz 4:4:4 and 4K@60Hz 4:2:0.
- Cables not included.
Certyfikaty
Gwarancja
|
 |
Administrowanie
systemem
Ethernet Control
- Standard control method.
- Configuration can be done over
the Internet via Web server or Telnet.
- Female RJ45 connector.
- 10/100 BaseT Ethernet interface.
Interfejs sieciowy Web podgląd wersji
demonstracyjnej
-
Security is ensured by password and user configurable timeout.
- Up to 25 users can access the web
page at one time.
- The user can access the following
pages:
- Switch page: allows the user to
connect any input to any output, save and recall up to ten
connections.
- Administration pages:
administrator can access pages for system configuration, network
configuration, naming video inputs/outputs, scanning sequence, DDC
options, changing password, and updating firmware.
- Standby Mode page: allows the
user to quickly place the switch in standby mode.
- Support page: provides links to
the product manual and firmware downloads webpage.
- Reboot page: allows the user to
quickly reboot the switch.
Telnet
-
Security is ensured by password.
- Up to 25 users can access the
telnet connection at one time.
- Commands are similar to RS232
commands.
- The telnet server listens on
ports 2000 and 2005.
- Port 2000 is for an operator
telnet session.
- Port 2005 is intended for a
software control type session using raw TCP communication.
Front Panel Interface
-
Standard control method
- Configuration and control can be
done using the front panel buttons.
- Keypad allows selection of the
input source to be routed to the desired outputs.
RS232 Control
- Standard control method
- Configuration and control can be done through the serial port.
- Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.
- Control4 certified module controls routing, reset, and status RS232 functions.
Infrared Remote Control (Optional)
- Optional control method.
- IRT-UNV is sold separately.
- Standard control method
- Transmitter can be up to 30 feet (9.1 meters) away.
- Control up to 15 switches with one remote.
- Power: Two AAA batteries (included).
|
 |
|
|
|
|
