|
|
|
|
|
|
|
EXTENDER KVM over IP Z PORTAMI VGA, DVI, USB I
ZASIĘGIEM 150m
|
 |
FUNKCJONALNOŚĆ
The XTENDEX® VGA/DVI USB KVM Extender Over IP provides remote KVM (USB
keyboard, USB mouse, and VGA/DVI monitors) access to a USB computer up
to 492 feet (150 meters) over a Gigabit network using a single CAT5e/6
cable. The extender consists of the ST-IPUSBVD-L-VW local unit that
connects to a computer and also supplies video to local VGA and DVI
monitors; and the ST-IPUSBVD-R-VW remote unit that connects to VGA and
DVI monitors, microphone, speakers, and up to four USB devices
(keyboard, mouse, flashdrive, web camera, or touchscreen display).
The local and remote units can be connected together for a
Point-to-Point connection via CAT5e/6 cable or a Point-to-Many
connection via a Gigabit network switch. Support for multiple
transmitters (Many-to-Many connections) requires a managed Gigabit
network switch.
- Supports resolutions to 1920x1080p at 60Hz.
- Extend up to 492 feet (150
meters) in a Point-to-Point connection.
- Extend up to 656 feet (200
meters) in a Point-to-Point or Point-to-Many connection via a Gigabit
network switch.
- The max distance between the
switch and the local/remote unit is 328 feet (100 meters).
- Built-in video converter and
switch - supports digital DVI and analog VGA.
- Connect a VGA USB computer and
DVI USB computer, and switch between sources using the front panel
buttons.
- Both the transmitter and receiver
support VGA and DVI monitors at the same time.
- Supports USB 2.0/1.1 devices.
- Keyboard and mouse are
hot-pluggable.
- Connect a mouse, keyboard,
flashdrive, web camera or touchscreen display.
- Supports video wall installations
up to 8x16 screens.
- Displays can be rotated 180 and
270°.
- Bi-directional Infrared Remote
(IR) control of HDMI source or display. IR transport channel can be
forward or backward per the installation.
- Supports full-duplex RS232 up to
115200 baud.
- Manage transmitter/receiver
connections and video wall configuration with built-in software or
iOS/Android app.
- Applications using multiple
transmitters and/or receivers require a managed Gigabit network switch
with VLAN/IGMP and Jumbo frame support.
- When using multiple remote units,
only one unit can have USB control over the source at any time.
- HDCP 1.4 compliant.
- Easily expandable – add receivers
as you add control stations.
|
 |
SPECYFIKACJA
TECHNICZNA
Moduł
lokalny
- Dołączenie Hosta
-
Compatible with a USB computer (PC, SUN or MAC) with VGA or DVI output.
- Multiplatform support: Windows 7/10/11, Linux, and MAC OS 10/11/12/13.
- One 15-pin HD connector.
- One female DVI-I connector.
- Signal type: single link digital
DVI.
- One female USB Type B connector.
- One female DB9 connector for
RS232 connection.
- Support full-duplex RS232 up to
115200 baud.
- Two female 3.5mm ports for
connecting an IR emitter and receiver.
- One female 3.5mm stereo port for
audio in.
- One female Gigabit RJ45 port for
sending/receiving video, audio, USB, RS232, and IR signals.
- Supports HDCP 1.4.
- Dołączenie lokalnej konsoli
-
Supports a VGA and DVI monitor connected at the same time.
- Both monitors simultaneously
display the same image.
- Resolutions to 1920x1080p at 60Hz supported.
- One female 15-pin HD connector
for local VGA monitor.
- One female DVI-D connector for
local DVI monitor.
- Signal type: single link digital
DVI.
- One female 3.5mm stereo port for
audio out.
Moduł
wyniesiony
-
Supports a VGA and DVI monitor connected at the same time.
- Both monitors simultaneously
display the same image.
- Resolutions to 1920x1080p at 60Hz supported.
- One female 15-pin HD connector
for VGA monitor.
- One female DVI-I connector for
DVI monitor.
- Signal type: single link digital
DVI.
- Four female USB Type A connectors.
- Two USB 1.1 connectors on front
of the unit for keyboard, mouse, flashdrive, web camera, or touchscreen
display.
- Two USB 2.0 on back of the unit
for keyboard, mouse, flashdrive, or touchscreen display.
- One female 3.5mm port for stereo
audio speakers.
- One female 3.5mm port for
microphone.
- One male DB9 connector for RS232
connection.
- Support full-duplex RS232 up to
115200 baud.
- Two female 3.5mm ports for
connecting an IR emitter and receiver.
- One female Gigabit RJ45 port for
sending/receiving video, audio, USB, RS232, and IR signals
- Supports HDCP 1.4.
Zasilanie
- Local and remote unit:
- Input: 230 VAC at 50 or
60 Hz via AC adapter.
- Output: 5VDC, 2A
Wymiary
-
Local Unit WxDxH (in): 7.48x5.06x1.57 (190x129x40 mm).
- Remote Unit WxDxH (in):
6.57x4.07x1.57 (167x104x40 mm).
Wymagania
środowiskowe
- Temperatura
pracy: 0°C do 55°C
- Temperatura
przechowywania: -20°C do
85°C
- Wilgotność
względna pracy i przechowywania: do 95% bez efektu kondensacji
Certyfikaty
Gwarancja
Max
Distance
-
492 feet (150 meters) in a Point-to-Point connection.
- 656 feet (200 meters) in a
Point-to-Point or Point-to-Many connection via a network switch.
- The max length between the switch
and the local/remote unit is 328 feet (100 meters).
Kable
-
Cables included with local unit:
- One male to male USB Type A to
USB Type B cable.
- Cables included with remote unit:
- Use CAT5e/6 straight through
cable with TIA/EIA-568B wiring terminated with standard RJ45 connectors
(not included).
- Use DVI-DS-2M-MM DVI-D
Male-to-Male Single Link Cable to connect to a DVI source or display
(not included).
- Use DVI-IS-xx-MM DVI-I
Male-to-Male Single Link Cable to connect to a DVI source or display
(not included).
- Use DVI-HD-xM-MM DVI-D Male to
HDMI-A Male Single Link Cable to connect to an HDMI source or display
(not included).
- Use VEXT-xx-MM VGA Male-to-Male
Cable without Ferrites to connect to a VGA source or display (not
included).
- Use VEXT-F-xx-MM VGA Male-to-Male
Cable with Ferrites to connect to a VGA source or display (not
included).
|
 |
 |
 |
 |
 |
|
|
|
|
