FUNKCJONALNOŚĆ
The VEEMUX® VGA Video Matrix Switch routes video from many computers to multiple displays (projectors, monitors, etc.) This switch can drive standard VGA cables, thus eliminating the need for external interfaces and coax cable connections via BNC connectors.

Signals from a range of input sources can be distributed to various output devices, in essence creating a "matrix" pattern of interconnection possibilities. A single computer video output can be routed to one or more monitors. Each image will be as crisp and clear as if directly connected to the original source. Each video output is buffered from each input, insuring signal integrity throughout the system.

• Configure and control the switch through Ethernet, serial port, front panel buttons, or optional IR remote control.
• NTI Switch Control Program with Graphical User Interface (GUI control) is included with the product. 
• Equipped with Liquid Crystal Display (LCD) for front panel operation. 
• Switch VGA video directly. 
• Each output provides one video signal. 
• Each input can be independently connected to any or all outputs. 
• Video bandwidth is 200 MHz or greater. 
• Supports 1920x1200 video resolution at a refresh rate of 85 Hz. 
• Stand-by mode offers reduced power. Available on 8-input models. 
• All units pass vigorous testing with 24 hr minimum burn in, heat testing, and load test of all ports. 

The VEEMUX switch is the ideal solution for any application where information from many computers is being presented, such as:

• Digital Signage
• Classrooms.
• Boardrooms.
• Trade shows.
• Conference and entertainment facilities.
• Courtrooms.
• Command centers.
• Control rooms.

SPECYFIKACJA TECHNICZNA
Video Input

• Female 15-pin HD connector.
• SM-8X2-15V-LC - Eight female 15-pin HD connectors.
• SM-8X4-15V-LC - Eight female 15-pin HD connectors.
• SM-8X8-15V-LC - Eight female 15-pin HD connectors.
• SM-16X4-15V-LCD - Sixteen female 15-pin HD connectors.
• SM-16X8-15V-LCD - Sixteen female 15-pin HD connectors.
• SM-16X12-15V-LCD - Sixteen female 15-pin HD connectors.
• SM-16X16-15V-LCD - Sixteen female 15-pin HD connectors.
• SM-32X8-15V-LCD - Thirty-two female 15-pin HD connectors.
• SM-32X16-15V-LCD - Thirty-two female 15-pin HD connectors.
• Impedance: 75 Ohms.

Video Output

• Female 15-pin HD connector.
• SM-8X2-15V-LC - Two female 15-pin HD connectors.
• SM-8X4-15V-LC - Four female 15-pin HD connectors.
• SM-8X8-15V-LC - Eight female 15-pin HD connectors.
• SM-16X4-15V-LCD - Four female 15-pin HD connectors.
• SM-16X8-15V-LCD - Eight female 15-pin HD connectors
• SM-16X12-15V-LCD - Twelve female 15-pin HD connectors.
• SM-16X16-15V-LCD - Sixteen female 15-pin HD connectors.
• SM-32X8-15V-LCD - Eight female 15-pin HD connectors
• SM-32X16-15V-LCD - Sixteen female 15-pin HD connectors.
• 1920x1200 video resolution with no degradation.
• Impedance: 75 Ohms.
• Bandwidth: 200 Mhz, fully loaded.

Power

• 230 VAC at 50 or 60 Hz via IEC connector.
• Power consumption
• SM-8X2-15V-LC : 5W
• SM-8X4-15V-LC : 5W
• SM-8X8-15V-LC : 5W
• SM-16X4-15V-LCD : 15W
• SM-16X8-15V-LCD : 15W
• SM-16X12-15V-LCD : 20W
• SM-16X16-15V-LCD : 25W
• SM-32X8-15V-LCD : 15W
• SM-32X16-15V-LCD : 30W
• 16- and 32-input models: add -48V5V10A, optional internal DC-DC converter to install in a Telecom environment.

MTBF

• SM-16x4-15V-LCD: 66 636 h
• SM-16x8-15V-LCD: 62 739 h
• SM-16x12-15V-LCD: 58 909 h
• SM-16x16-15V-LCD: 56 694 h
• SM-32x8-15V-LCD: 56 080 h
• SM-32x16-15V-LCD: 51 163 h

Cables

• Interface cables between the computers and the switch are required for proper operation. 
• Recommended NTI video cables:
• VGA interface cable (VEXT-xx-MM). 
• VGA to BNC cable (VINT). 
• Cables not included.

Wymagania środowiskowe

• Temperatura pracy: 0°C do 38°C
• Temperatura przechowywania: -30°C do 60°C
• Wilgotność względna pracy i przechowywania: 17 do 90% bez efektu kondensacji

Certyfikaty

• 8-input models: CE, RoHS „„ 
• 16- and 32-input models: CE, FCC, RoHS
• Zgodność z TAA

Gwarancja

• Dwa lata

Dimensions

Administrowanie systemem - RS 232 Control
RS232 Control

• Standard control method. 
• Configuration and control can be done through the serial port.
• Baud rate: 1200 through 9600.
• Address up to 15 units with one serial port.
• Changes multiple input-to-output connections quickly and efficiently.

Commands

• RS - causes switch to reset so that IN1 connects to OUT1, IN2 connects to OUT2.
• CS - causes one INx/OUTx connection to occur.
• CA - causes all inputs to connect to specified output.
• RO - reads what input is connected to specified output.
• RU - reads size of matrix, reports number of inputs and number of outputs on specified switch.
• EA - set the IP address.
• EM - set the IP mask.
• EG - set the default gateway.
• ET - set the webserver timeout.

NTI Switch Control Program

• Supports Microsoft Windows® 95/98/NT/ME/2000/XP/Vista/7. 
• Intuitive graphical software provides fast switch control of up to 15 NTI switches using an RS232 connection. 
• Control switches with simple drag-n-drop interfaces. 
• Supports control over daisy-chained configurations. 
• Save and load feature allows frequently used matrix switch configurations to be recalled with the click of a button. 
• Up to nine configurations can be saved/recalled from the switch's internal memory. 
• Automatically displays status for all attached switches each time the program is started. 
• Auto-Update: the view will automatically update when the switch changes configuration. 
• Includes HTML help feature. 
• View and control multiple switches simultaneously with three unique and powerful views:
• Matrix View
• Table View
• Line View

Download RS232 Switch Control Program

• Download program files

Administrowanie systemem - Front Panel Interface

• Configuration and control can be done using the front panel buttons.
• Keypad allows selection of the input source to be routed to the desired outputs.
• LED Matrix Display visually shows which inputs are connected to which outputs. (Available on the 16x8, 16x12, 16x16, 32x8 and 32x16 video matrix switches.)

Administrowanie systemem - Ethernet Control
Ethernet Control

• Standard control method. 
• Female RJ45 connector.
• 10/100 BaseT Ethernet interface.
• Supported protocol: HTTP, HTTPS, Telnet.
• Configuration and control can be done over the Internet via Web Server or Telnet.

Interfejs sieciowy Web podgląd wersji demonstracyjnej

• Password (optional SSL encryption) and Administrator configurable timeout to ensure security.
• Up to 25 users can be logged into the web page at one time.
• Users and administrators can access the following pages:
• Switch page - connect any input to any output, save and recall up to 10 connection configurations, force compensation on all ports. Ports can be listed in order by port name or port number.
• Change Password page - administrator and users can change their password (passwords are between 5 and 16 characters long inclusive). 
• Help page - review documentation on the usage of the web interface. 
• Update Webserver page - restart the webserver to resynchronize all settings with the Veemux proper. 
• Logout page - view currently active users and logout of the web interface. 
• The Administrator can access the following Administrative only pages: 
• Web Setup page - configure IP address, subnet mask and timeout. 
• Serial Setup page - configure serial speed and serial settings.
• Ports Settings page - assign names to video inputs and outputs.
• Update Firmware page - load firmware updates to the VEEMUX Switch.

Downloads

• Ethernet Control Firmware Files

Telnet

• Security is ensured by the Administrative password.
• Commands are similar to RS232 commands.
• The telnet server listens on ports 2000 and 2005.
• Port 2000 is for an operator telnet session.
• Port 2005 is intended for a software control type session.

Administrowanie systemem - Infrared Control (Included with 4- and 8-Input SM-nXm-15V-LC Models)

• Transmitter can be up to 30 feet (9 m) away.
• Control up to 15 switches with one remote.
• Power: Two AAA batteries (included)
• Standard control method for 4- and 8-input models.

Administrowanie systemem - Infrared Control Option (For 16- and 32-Input SM-nXm-15V-LCD Models & All SM-nXm-AV-LCD Models)

• Transmitter can be up to 50 feet (15 m) away.
• Control up to 4 switches with one remote.
• Controls a maximum of 64 inputs and 32 outputs.
• Power: Two AA batteries (included)
• Add "-IR" to part number to specify this option.
• Option available on 16- and 32-input models only.
• IRT-64X32 is sold separately.