FUNKCJONALNOŚĆ
The VEEMUX® Audio/Video Matrix Switch routes audio and video inputs from many video sources to multiple displays (projectors, monitors, etc.) and speakers via inexpensive Cat5/5e/6 UTP cable. It is capable of connecting to as many as 32 video sources via transmitters and 16 video displays via receivers with a maximum extension of 600 feet (180 m) between the local and remote units.

A single audio/video output can be routed to one or more destinations. Each image will be as crisp and clear as if directly connected to the original source. Buffered video outputs and digital transmission of audio signals ensures integrity is maintained throughout the system.

• Configure and control the switch through Ethernet, serial port or front panel buttons. 
• Matrix Control Software with Graphical User Interface is included. 
• Supports resolutions up to 1920x1440. 
• Inputs and outputs can be named. 
• Video quality adjustment is done automatically at every connection change, or can be forced via the front panel or web interface. 
• Equipped with Liquid Crystal Display (LCD) for front panel operation. 
• A digital VU-meter shows the audio levels of the selected output. 
• Each output provides one video signal and one stereo audio signal. 
• Each input can be independently connected to any or all outputs with no image degradation. 
• No loss of audio or video quality between the local and remote units. 
• 1RU or 2RU rackmount case is standard. 

SPECYFIKACJA TECHNICZNA - Audio/Video Matrix Switch via CAT5

• Female RJ45 input/output connectors. 
• Analog bandwidth is 175 MHz. 
• 10/100BaseT ethernet interface.
• Supported protocols: HTTP. HTTPS, Telnet
• RS232 interface
• Signal to noise ratio (SNR):
• Audio: >72dBA
• Video: >65dB
• Audio harmonic distortion and noise: <0.06%
• Video distortion: 70dB @ 10 MHz

Power

• 230 VAC at 50 or 60 Hz via IEC connector.
• Power consumption:
• SM-8X8-C5AV-LCD : 20 W
• SM-16X16-C5AV-LCD : 40 W
• SM-32X16-C5AV-LCD : 35 W
• Add -48V5V10A2, optional internal DC-DC converter, to install switch in a Telecom environment.

MTBF

• SM-8X8-C5AV-LCD : 58 607 h
• SM-16X16-C5AV-LCD : 48 479 h
• SM-32X16-C5AV-LCD : 42 137 h

Kable

• Use CAT5, CAT5e or CAT6 solid straight through cable for TIA/EIA-568B wiring terminated with standard RJ45 connectors (not included).

Wymagania środowiskowe

• Temperatura pracy: 0°C do 38°C
• Temperatura przechowywania: -30°C do 60°C
• Wilgotność względna pracy i przechowywania: 17 do 90% bez efektu kondensacji

Wymiary

Certyfikaty

• CE, RoHS
• Zgodność z TAA

Gwarancja

• Dwa lata

SPECYFIKACJA TECHNICZNA - Local Unit (Transmitter)
Video

• VGA transmitter:
• Male 15-pin HD connector for input connection.
• Female 15-pin HD connector for local monitor.
• Supports resolutions to 1920x1440.
• Signal to noise ratio: >55dB 
• Distortion: 65dB at 5MHz 
• Input impedance: 75 Ohms. 
• Maximum input level: 1.45Vp-p.
• Supports Separate and Composite TTL level sync.
• Input Sync frequency ranges:
• Horizontal: 15 to 130 kHz.
• Vertical: 30 kHz to 150 Hz.
• Video is DC coupled.

Audio

• VGA video + audio transmitter: 3.5 mm stereo audio RCA plugs for input connection and 3.5 mm stereo audio jack for local speakers.
• Input impedance: 10k Ohms.
• Maximum input levels: 3.1Vp-p (line level).
• CD quality audio output.

Power

• 230 VAC at 50 or 60 Hz via AC adapter. 
• Power consumption: 10 W 
• Use the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the local unit in a Telecom environment.

Wymagania środowiskowe

• Temperatura pracy: 0°C do 38°C
• Temperatura przechowywania: -30°C do 60°C
• Wilgotność względna pracy i przechowywania: 17 do 90% bez efektu kondensacji

Certyfikaty

• CE, RoHS
• Zgodność z TAA

Gwarancja

• Dwa lata

SPECYFIKACJA TECHNICZNA - Remote Unit (Receiver)
Video

• VGA receiver: 
• Female 15-pin HD connector. 
• Supports resolutions up to 1920x1440. 
• Signal to noise ratio: >55dB 
• Distortion: 65dB at 5MHz 
• Video quality adjustment for different lengths of CAT5/5e/6 cable is done automatically.
• When using CAT6, some degradation may be experienced depending on the length of the cable.
• Output impedance: 75 Ohms.
• Maximum output level: 1.45Vp-p.

Audio

• VGA video + audio receiver: 3.5 mm stereo audio jack. 
• Frequency response: 20 Hz to 20 kHz, ±1dB. 
• Signal-to-Noise Ratio (SNR): 72 dBA.
• Total Harmonic Distortion and Noise (THD+N): 0.017% 
• Stereo crosstalk: -70 dB. 
• Maximum output levels: 3.1Vp-p (line level).
• Line level output: supports multimedia speakers.
• CD quality audio output.
• Require powered speakers.

Power

• 230 VAC at 50 or 60 Hz via AC adapter. 
• Power consumption: 10 W 
• Use the PWR-48V-9V0,6A or PWR-12V-9V0,6A DC-DC power converter to install the remote unit in a Telecom environment.

Wymagania środowiskowe

• Temperatura pracy: 0°C do 38°C
• Temperatura przechowywania: -30°C do 60°C
• Wilgotność względna pracy i przechowywania: 17 do 90% bez efektu kondensacji

Certyfikaty

• CE, RoHS
• Zgodność z TAA

Gwarancja

• Dwa lata

Administrowanie systemem
Front Panel Interface

• Liquid Crystal Display (LCD) can display all current connections. 
• Locally change input and output selections with front panel buttons.
• Digital VU-Meter displays audio levels for the currently selected port. 
• Configuration and control can be done using the front panel buttons. 
• Main menu allows the user to: 
• Set serial address. 
• Set serial speed. 
• Set IP address.
• Set Subnet Mask.
• Adjust contrast.
• Force compensation.
• Show size.

RS232 Control

• Configuration and control can be done through the serial port.
• Control the switch using the NTI Switch Control Program with Graphical User Interface (GUI control) via RS232.
• Selectable baud rate: 1200 through 9600.
• Baud rate is set via the main menu, serial command, telnet or web page.

Commands

• CS-causes one INx/OUTx connection to occur. 
• CA-causes all inputs to connect to specified output. 
• RO-reads what input is connected to specified output. 
• CC-save matrix. 
• RC-recall matrix. 
• CB-change baud rate.
• RV-version information.
• RU-reads size of matrix, reports number of inputs and number of outputs on specified switch.
• EA-set the IP address.
• EM-set the IP mask.
• EG-set the default gateway.
• ET-set the webserver timeout.

Ethernet Control

• Configuration can be done over the Internet via web page or telnet.

Interfejs sieciowy Web podgląd wersji demonstracyjnej

• Security is ensured by password and user configurable timeout. 
• Up to 25 users can access the web page at one time. 
• The user can access the following pages: 
• Switch page: allows the user to connect any input to any output, save and recall up to ten connections. 
• Administration pages: administrator can access setup pages, port setting page and update firmware page. Assign names to video and audio inputs and outputs.
• Password page: allows the user to change the password for accessing the web interface. 
• Help page: documentation on the usage of the web interface. 
• Update Web Server page: globally update the web server to any settings that have been changed. 
• Logout page: view currently active connections and logout of the web interface.

Telnet

• Security is ensured by password.
• Commands are similar to RS232 commands.
• The telnet server listens on ports 2000 and 2005.
• Port 2000 is for an operator telnet session.
• Port 2005 is intended for a software control type session.