|
|
|
|
|
|
|
EXTENDER PORTU HDMI 4K Z ZASIĘGIEM 10km NA JEDNYM KABLU ŚWIATŁOWODOWYM
|
 |
FUNKCJONALNOŚĆ
The XTENDEX® 4K 18Gbps HDMI Extender via Fiber Optic Cable locates an Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI display, IR, stereo audio, and RS232 up to 6.21 miles (10 km) away from a 4K HDMI source using a single LC singlemode fiber optic strand and 984 feet (300 meters) using OM3 multimode fiber optic cable.
Each extender consists of a transmitter that connects to an HDMI source and a local display via the HDMI loop output, and a receiver that connects to an HDMI display.
- Signal transmission via single-strand singlemode or multimode LC fiber optic cable.
- Using singlemode 9-micron cable, extend to 6.21 miles (10 kilometers).
- Using multimode 50-micron OM3 (or better) cable, extend to 984 feet (300 meters).
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30/50/60Hz YUV 4:4:4, HDTV resolutions to 1080p @120Hz, and up to 1920x1200 (WUXGA).
- HDMI features supported:
- HDMI 2.0
- 8-bit, 10-bit, and 12-bit Deep Color
- Dolby TrueHD, DTS-HD Master Audio, Dolby Digital, Dolby Digital+, Dolby Atmos, LPCM 2/5.1/7.1CH, DTS 5.1, and DTS:X
- YUV 4:4:4, 4:2:2, and RGB
- Bandwidth up to 600 Mhz (18Gbps)
- 3D (1080p @60Hz)
- HDR
- HDCP 2.2 and 1.4 compliant.
- Supports local and remote HDMI displays.
- Supports audio embedding and de-embedding.
- Use the switch on the transmitter to select HDMI digital audio or analog stereo audio source.
- Simultaneously outputs both HDMI digital audio and analog stereo audio.
- When HDMI audio is selected, the extender passes the embedded digital audio to the HDMI connector and also converts/de-embeds the digital signal to analog stereo audio.
- When LINE audio is selected, the extender passes the analog stereo audio to the 3.5mm analog audio connector and also converts/embeds the analog signal to digital audio.
- Bi-directional IR control from input and output locations.
- Support full-duplex RS232 up to 115200 baud.
- Plug-and-play functionality – no software needed.
- Cables can be installed in conduit prior to extender installation.
- Integrated mounting brackets for easy surface/wall mounting.
|
 |
SPECYFIKACJA TECHNICZNA
Moduł lokalny
- One female HDMI connector for source.
- One female HDMI connector for local display.
- Two female 3.5mm ports for connecting an IR emitter and receiver (included).
- IR frequency: 20KHz to 60KHz
- One female 3.5mm port for stereo audio input.
- 3-pin screw terminal for RS232.
- Supports full-duplex RS232 up to 115200 baud.
- One simplex female LC fiber optic port for sending video/audio, IR, and RS232 signals.
- Female USB Micro Type B connector for firmware updates.
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30/50/60Hz YUV 4:4:4, HDTV resolutions to 1080p @120Hz, and up to 1920x1200 (WUXGA).
- Supports HDCP 2.2 and 1.4
Moduł wyniesiony
- One female HDMI connector for display.
- Two female 3.5mm ports for connecting an IR emitter and receiver (included).
- IR frequency: 20KHz to 60KHz
- One female 3.5mm port for stereo audio output.
- 3-pin screw terminal for RS232.
- Supports full-duplex RS232 up to 115200 baud.
- One simplex female LC fiber optic port for sending video/audio, IR, and RS232 signals.
- Female USB Micro Type B connector for firmware updates.
- Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30/50/60Hz YUV 4:4:4, HDTV resolutions to 1080p @120Hz, and up to 1920x1200 (WUXGA).
- Supports HDCP 2.2 and 1.4
- Max data rate: 18Gbps
Zasilanie
- Local and remote unit: 230 VAC at 50 or 60Hz via AC adapter.
- Input voltage: 5VDC, 1A
- Power consumption:
- Local unit: 3.75W
- Remote unit: 3W
Wymagania środowiskowe
- Temperatura pracy: 0°C do 40°C.
- Temperatura przechowywania: -20°C do 60°C.
- Wilgotność względna pracy i przechowywania: 20 do 90% bez efektu kondensacji.
Wymiary
- WxDxH (in):6.32x3.20x0.73 (161x81x18 mm)
Certyfikaty
Gwarancja
Maksymalny zasięg
- 6.21 miles (10 km) over singlemode 9/125-micron LC simplex fiber optic cable.
- 984 feet (300 meters) over multimode 50/125-micron OM3 (or better) LC simplex fiber optic cable.
Kable
- Interface cables between the video source/display and the transmitter/receiver are required for proper operation.
- Supports cable lengths to 20 feet.
- Cables longer than 20 feet can be used provided they have a built-in video equalizer (also known as "active HDMI cables").
- Use HD-xx-MM cable to connect an HDMI source or display.
- Use DVI-HD-xx-MM cable to connect a DVI source or display.
- Use HD-ACT-xx-MM 4K HDMI Active Cables to connect an HDMI source or display up to 100 feet.
- HD-ACT-20/25/30/40/50/60-MM supports resolutions to 4K@60Hz (18 Gbps).
- HD-ACT-75/100-MM supports resolutions to 4K@30Hz (10.2 Gbps).
- Use a simplex LC singlemode 9/125-micron fiber optic cable to extend the receiver from the transmitter up to 6.21 miles (10 km).
- Use a simplex LC multimode 50/125-micron OM3 (or better) fiber optic cable to extend the receiver from the transmitter up to 984 feet (300 meters).
- Cables not included.
Zawartość dostarczanego zestawu
- One transmitter unit
- One receiver unit
- One fiber transmitter module
- One fiber receiver module
- Two IR emitters
- Two IR receivers
- Two power supplies
- US, UK, EU, AUS power supply plugs included.
- Two screw terminal pairs for RS232
|
 |
 |
|
Zestawienie
oferowanych urządzeń
|
|
Nazwa
|
Nr katalogowy
|
Instrukcja obsługi
|
Karta katalogowa
|
|
4K 18Gbps HDMI Extender with Stereo Audio and Local Access via One LC Singlemode or Multimode Fiber Optic Cable
|
ST-FO4K18GB-RSLA-LCV2
|
PDF manual
|
Karta katalogowa
|
|
Kabel z wtykami
"męskimi" HDMI
|
|
Nr katalogowy
|
Długość
|
|
HD-3-MM
|
0,9m (3 feet)
|
|
HD-6-MM
|
1,8m (6 feet)
|
|
HD-10-MM
|
3,0m (10 feet)
|
|
HD-15-MM
|
4,5m (15 feet)
|
|
|
|
|
|
